Teltonika RUTM50 5G Router

The RUTM50 is the second 5G router in the Teltonika range and provides all the security, reliability and functionality of the popular 4G router range but the embedded 5G modem provides a high speed 5G Internet connection for M2M applications that need higher bandwidth. The RUTM50 will be available in October 2023 from Teltonika UK Distributor, Millbeck and via the RUTX50 online store.

Teltonika RUTM50 5G Router

This Industrial 5G router will be the second 5G router in the Teltonika range and will provide all the same features, security and reliability as the RUTX50 but with a more competitive price tag.

Teltonika RUTM50 Key Features

5G – Ultra-high cellular speeds of up to 3.3 Gbps
SA & NSA – Supports both architectures to leverage the 5G infrastructure
ULTRA-LOW LATENCY – Single-digit latency for mission-critical applications
DUAL SIM – Uninterrupted communication with auto-failover
WI-FI 5 – Dual-band data throughput for up to 150 clients simultaneously
FUTURE-PROOFING – Backward compatible with 4G (LTE CAT 20) and 3G network technologies

Standard Package Contains:

RUTM50 Router
18 W PSU
4 x Mobile antennas (swivel, SMA male)
2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
1 x GNSS antenna (adhesive, SMA male, 3 m cable)
Ethernet cable (1.5 m)
SIM Adapter kit
QSG (Quick Start Guide)
Packaging box

Powerful & Efficient

5G dual SIM cellular communication combined with 5 Gigabit Ethernet ports and dual-band Wi-Fi enables reliable ultra-low latency data transfer.

Adaptability

The power of 5G technology, combined with a wide range of interfaces and industrial hardware features, ensures adaptability for future upgrades and expansions.

RutOS & RMS

RUTX50 comes with the RutOS, which provides advanced security features and specialized industrial protocols for a wide range of professional application scenarios, and is compatible with our Remote Management System (Teltonika RMS), for optimized remote management and monitoring capabilities of large fleets of devices.

Teltonika RUTX50 – Technical Specifications

Mobile

Mobile module: 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
Status: Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
SMS/Call: SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
USSD: Supports sending and reading Unstructured Supplementary Service Data messages
Black/White list: Operator black/white list
Band management: Band lock, Used band status display
APN: Auto APN
Bridge mode: Direct connection (bridge) between mobile ISP and device on LAN
Passthrough: Gateway assigns its mobile WAN IP address to another device on LAN
Multiple PDN: Possibility to use different PDNs for multiple network access and services

Wireless

Wireless mode: 802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSID: ESSID stealth mode
WiFi users: Up to 150 simultaneous connections
Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, built-in customizable landing page
Wireless mesh/roaming: Wireless mesh (802.11s), fast roaming (802.11r)

Ethernet Interface

WAN: 1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN: 4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover

Network

Network protocols: TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
Routing: Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Connection monitoring: Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall: Port forwards, traffic rules, custom rules
DHCP: Static and dynamic IP allocation
DDNS: Supported >25 service providers, others can be configured manually
SSHFS: Possibility to mount remote file system via SSH protocol

Security

Authentication: Pre-shared key, digital certificates, X.509 certificates
Firewall: Pre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Attack prevention: DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN: Port and tag-based VLAN separation
Mobile quota control: Set up custom data limits for SIM card
WEB filter: Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access control: Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

OpenVPN: Multiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN: Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
GRE: GRE tunnel
IPsec: IKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
SSTP: SSTP client instance support
STUNNEL: Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN: Method of building scalable IPsec VPNs
PPTP, L2TP: Client/Server services can run simultaneously, L2TPv3 support
WireGuard: WireGuard VPN client and server support
ZeroTier: ZeroTier VPN

Monitoring & Management

WEB UI: HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTA: Firmware update from server, automatic notification
SSH: SSH (v1, v2)
SMS: SMS status, SMS configuration, send/read SMS via HTTP POST/GET
CALL: Reboot, Status, Mobile data on/off, Output on/off
TR-069: OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTT: MQTT Broker, MQTT publisher
SNMP: SNMP (v1, v2, v3), SNMP trap
JSON-RPC: Management API over HTTP/HTTPS
MODBUS: MODBUS TCP status/control
RMS: Teltonika Remote Management System (RMS)

System Characteristics

CPU: Quad-core ARM Cortex A7, 717 MHz
RAM: 256 MB (100 MB available for userspace)
FLASH storage: 256 MB (80 MB available for userspace)

Power

Connector: 4-pin industrial DC power socket
Input voltage range: 9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
PoE (passive): Mode B, LAN1 Port, 9 – 50 VDC
Power consumption: Idle: <4 W, Max: <18 W

Physical Interfaces

Ethernet: 5 x RJ45 ports, 10/100/1000 Mbps
I/Os: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs: 3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
SIM: 2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power: 1 x 4-pin DC power connector
Antennas: 4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
USB: 1 x USB A port for external devices
Reset: Reboot/User default reset/Factory reset button
Other: 1 x Grounding screw

Physical Specification

Casing material: Aluminum housing
Dimensions (W x H x D): 132 x 44.2 x 95.1 mm
Weight: 533 g
Mounting options: DIN rail (can be mounted on two sides), flat surface placement

Operating Environment

Operating temperature: -40 °C to 75 °C
Operating humidity: 10 % to 90 % non-condensing
Ingress Protection Rating: IP30

Teltonika RUTM50 5G Router