RUTX50

The Teltonika RUTX50 is the new Industrial 5G router providing a high speed LTE 5G Internet connection using a 5G SIM card. The embedded 5G Modem provides the connection to the 5G network for lightning fast 5G mobile broadband. This is delivered to the LAN via high speed, Gigabit Ethernet for wired connectivity and the RUTX50 router has built-in 802.11AC WiFi 5 to provide high speed WiFi hotspot for wireless users.
RUTX50

RUTX50 Overview

RUTX50 is the new Industrial 5G router from Teltonika.  It provides a high speed LTE 5G Internet connection using a 5G SIM card inserted into the SIM slot of the router. The embedded 5G Modem provides the connection to the 5G network for lightning fast 5G mobile broadband. This is delivered to the LAN via high speed, Gigabit Ethernet for wired connectivity and the RUTX50 router has built-in 802.11AC WiFi 5 to provide high speed WiFi hotspot for wireless users.

The RUTX50 router from Teltonika provides a reliable, secure and practical solution and with the familiar RUTOS used by hundreds of thousands of customers with the popular 4G router range (RUT950, RUT955, RUT240, RUTX09, RUTX11, RUTX12, RUTX14) users will find the only difference is the super fast 5G Internet connection. Of course you might also notice the price because the cost of 5G modems is still pretty high so expect to pay a premium for the new Teltonika RUTX50 5G Router.

RUTX50 Key Features

  • 5G
    Blazing fast 5G NR Sub-6GHz and 4G LTE-Advanced Pro Cat 20 cellular radio connectivity. 2.1 Gbps (DL)/ 900 Mbps (UL)
  • WiFi
    802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
  • ETHERNET
    5 x Gigabit Ethernet Ports (RJ45, LAN/WAN switchable)
  • USB
    USB Low Energy interface
  • DUAL SIM
    Auto-failover, backup WAN and other switching scenarios
  • GNSS
    Global Navigation Satellite System for location services with geofencing functionality
  • REMOTE MANAGEMENT
    Remote access, monitoring, control & VPN services via Teltonika Networks RMS
  • DURABLE
    Wide operating temperature range for broader use case

Antenna Connections

The RUTX50 has 4 x SMA Female ports on the side for the connection of the supplied 4 x 5G Antennas (elbow joint, 5G paddle antenna) so this router can support the connection of alternative antennas. This means the RUTX50 can utilise a wide range of 4×4 MiMo antennas dependant upon the installation.

For example, if using this router in a cabinet then you may need a hole mounted, dome or puck 5G antenna, or for installation inside a building then an outdoor 5G antenna such as a directional or omni-directional 4×4 MiMo 5G Antenna to ensure the optimum 5G performance for this industrial 5G router.

Quectel RG501Q-EU 5G Module Product Features

  • Worldwide 5G/4G/3G coverage
  • Supported 5G NSA and SA modes
  • Feature refinements: DFOTA and VoLTE (Optional)
  • Multi-constellation GNSS receiver available for applications
  • requiring fast and accurate positioning in any environment
  • Optimized for IoT and M2M applications with LGA form factor supported

Teltonika Industrial Routers

Teltonika are best known for their RUT950, RUT255 and RUT240 Industrial 4G routers which have recently been upgraded and are now known as RUT241, RUT951 and RUT956.  These have proved popular in many industries to provide reliable and secure 4G Internet connectivity for remote management and monitoring.  Teltonika expended the range with their 4G routers for business with the RUTX range and the popular RUTX09, RUTX11 and RUTX12 and Teltonika is developing a new range of lower cost 4G and 5G routers including the RUT200, RUT901 and RUT906 4G Routers and the RUTM50 5G router.

Antennas

We stock a range of 4G and 5G antennas suitable for use with the full range of Teltonika 4G and 5G routers.  Many industrial routers are installed in situations where the router is indoor or inside an enclosure that reduces the 4G/5G network signal when using the supplied antennas connected directly to the router.  By installing an alternative antenna outdoors or on top or the side of a kiosk or cabinet can help the router receive the best available signal for optimum performance and reliability.

  • DWMM4-6-60-5SP

    Panorama DWMM4-6-60 Omni-Directional 4×4 MiMo 4G/5G Antenna 7dBi Peak Gain

    Rated 0 out of 5
    £169.00 Excl VAT
  • WMM4G-6-60 4x4 mimo directional 4G / 5G Antenna

    Panorama WMM4G-6-60 4×4 MiMo 4G/5G Directional Antenna

    Rated 0 out of 5
    £291.00 Excl VAT
  • MIMORAD 5G Antenna 2x MIMO

    Fullband® MIMORAD Outdoor 4G/5G MIMO Antenna 6dBi Peak Gain with 2 x 5m cables with SMA Male Connectors

    Rated 0 out of 5
    £55.00 Excl VAT
  • GXS606-DUAL

    Fullband GXS606-DUAL 5G Antenna with Wall Mount Bracket.

    Rated 0 out of 5
    £49.00 Excl VAT
  • LMO6138

    LMO6138 Outdoor MiMo 4G/5G Antenna with 2 x 10cm

    Rated 0 out of 5
    £74.00 Excl VAT

Teltonika RUTX50 5G Modem Details

RUTX50 Web GUI – Status Page

Here is a screenshot of the RUTX50 status page showing the

 

We can see from the above that the router uses the RG501Q-EU 5G Modem.

Quectel RG501Q-EU 5G Module is a 5G Sub-6 GHz module optimized specially for IoT and M2M cases delivering max data rates up to 5 Gbps downlink and 900 Mbps uplink and supporting both 5G NSA and SA modes in LGA form factor.

Quectel RG501Q-EU 5G Module Product Overview

Quectel RG501Q-EU 5G Module is a 5G Sub-6 GHz LGA module optimized specially for IoT and M2M applications. By adopting the 3GPP Rel-15 technology, the module delivers maximum data rates up to 5 Gbps downlink and 900 Mbps uplink. Moreover, it supports both 5G NSA and SA modes, Option 3x, 3a, 3 and Option 2 network architectures, making it backwards compatible with 4G/3G network. Since it is pin-to-pin compatible with Quectel LTE-A Cat 12 EG512R-EA module. Quectel RG501Q-EU could meet customers’ different application demands for high speed, large capacity, low latency, and high reliability etc.

Apart from them, A rich set of Internet protocols, industry-standard interfaces (USB 2.0/3.0/3.1, PCIe 3.0, RGMII, PCM, UART, etc.) and abundant functionalities (USB drivers for Windows 7/8/8.1/10, Linux and Android) extend the applicability of the module to a wide range of IoT and M2M applications such as business router, home gateway, STB, industrial laptop, consumer laptop, industrial PDA, rugged tablet PC and video surveillance.

Quectel RG501Q-EU 5G Module Product Features

 

  • Worldwide 5G/4G/3G coverage
  • Supported 5G NSA and SA modes
  • Feature refinements: DFOTA and VoLTE (Optional)
  • Multi-constellation GNSS receiver available for applications
  • requiring fast and accurate positioning in any environment
  • Optimized for IoT and M2M applications with LGA form factor supported

CLICK HERE to read about the supported cellular frequencies.

RUTX50 SPECIFICATION

MOBILE
Mobile module5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4×4 MIMO), 900/600 Mbps UL (2×2); 4G (LTE) – LTE Cat 20 2.0Gbps DL, 200Mbps UL; 3G – 42 Mbps DL, 5.76Mbps UL
StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID.
SMS/CallSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listOperator black/white list
Band managementBand lock, Used band status display
APNAuto APN
Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
PassthroughGateway assigns its mobile WAN IP address to another device on LAN
Multiple PDNPossibility to use different PDNs for multiple network access and services
WIRELESS
Wireless mode802.11b/g/n/ac Wave 2 (WiFi 5) with data transmission rates of up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSIDESSID stealth mode
WiFi usersUp to 150 simultaneous connections
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, built-in customizable landing page
Wireless mesh/roamingWireless mesh (802.11s), fast roaming (802.11r)
ETHERNET
WAN1 x WAN port (can be configured as LAN) 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN4 x RJ45 port, 10/100/1000 Mbps, supports auto MDI/MDIX crossover
NETWORK
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, PPP, PPPoE, SSH, DHCP, SNMP, MQTT, Wake on LAN (WOL)
RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP)
Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, custom rules
DHCPStatic and dynamic IP allocation
DDNSSupported >25 service providers, others can be configured manually
SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
AuthenticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via the WebUI, unlimited firewall configuration via CLI; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention ( SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANPort and tag-based VLAN separation
Mobile quota controlSet up custom data limits for SIM card
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
GREGRE tunnel
IPsecIKEv1, IKEv2, supports up to 5 x VPN IPsec tunnels (instances), with 5 encryption methods (DES, 3DES, AES128, AES192, AES256)
SSTPSSTP client instance support
STUNNELProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
PPTP, L2TPClient/Server services can run simultaneously, L2TPv3 support
WireGuardWireGuard VPN client and server support
ZeroTierZeroTier VPN
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
GatewayAllows sending commands and receiving data from MODBUS Master through the MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
IoT PLATFORMS
Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CALLReboot, Status, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
SYSTEM CHARACTERISTICS
CPUQuad-core ARM Cortex A7, 717 MHz
RAM256 MB (100 MB available for userspace)
FLASH storage256 MB (80 MB available for userspace)
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
Operating systemRutOS (OpenWrt based Linux OS)
Supported languagesBusybox shell, Lua, C, C++
Development toolsSDK package with build environment provided
LOCATION TRACKING
GNSSGPS, GLONASS, BeiDou, Galileo and QZSS
CoordinatesGNSS coordinates via WebUI, SMS, TAVL, RMS
NMEANMEA 0183
Server softwareSupports server software: TAVL, RMS
GeofencingMultiple configurable geofence zones
USB
Data rateUSB 2.0
ApplicationsSamba share, USB-to-serial, Modbus gateway
External devicesPossibility to connect external HDD, flash drive, additional modem, printer
Storage formatsFAT, FAT32, NTFS
INPUT/OUTPUT
Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
EventsSMS, Email, RMS
I/O jugglerAllows setting certain I/O conditions to initiate event
POWER
Connector4-pin industrial DC power socket
Input voltage range9 – 50 VDC, reverse polarity protection, surge protection >51 VDC 10us max
PoE (passive)Mode B, LAN1 Port, 9 – 50 VDC
Power consumptionIdle: <4 W, Max: <18 W
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet5 x RJ45 ports, 10/100/1000 Mbps
I/Os1 x Digital Input, 1 x Digital Output on 4-pin power connector
Status LEDs3 x connection status LEDs, 3 x connection strength LEDs, 10 x Ethernet port status LEDs, 4 x WAN status LEDs, 1x Power LED, 2 x 2.4G and 5G WiFi LEDs
SIM2 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V
Power1 x 4-pin DC power connector
Antennas4 x SMA for Mobile, 2 x RP-SMA for WiFi, 1 x SMA for GNSS
USB1 x USB A port for external devices
ResetReboot/User default reset/Factory reset button
Other1 x Grounding screw
PHYSICAL SPECIFICATION
Casing materialAluminum housing
Dimensions (W x H x D)132 x 44.2 x 95.1 mm
Weight533 g
Mounting optionsDIN rail (can be mounted on two sides), flat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 °C to 75 °C
Operating humidity10 % to 90 % non-condensing
Ingress Protection RatingIP30

STANDARD PACKAGE CONTAINS

  • RUTX50 5G Router
  • 18 W PSU
  • 4 x Mobile antennas (swivel, SMA male)
  • 2 x WiFi antennas (magnetic mount, RP-SMA male, 1.5 m cable)
  • 1 x GNSS antenna (adhesive, SMA male, 3 m cable)
  • Ethernet cable (1.5 m)
  • SIM Adapter kit
  • QSG (Quick Start Guide) / RMS Flyer
  • Packaging box

STANDARD ORDER CODES

Product codeHS codeHTS codePackage contains
RUTX50 0000008517628517.62.00Standard package

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS

Product codeRegion (operator)Frequency
RUTX50 0*****Europe1, the Middle East, Africa, Oceania, Brazil
  • 5G NR NSA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78
  • 5G NR SA: n1, n3, n5, n7, n8, n20, n28, n38, n40, n41, n77, n78
  • 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B28
  • 4G (LTE-TDD): B38, B40, B41, B42, B43
  • 3G: B1, B5, B8

The price and lead-times for region (operator) specific versions may vary. For more information please contact us.

1 – Regional availability – excluding Russia & Belarus.

Top Selling Products

  • RUT956

    Teltonika RUT956 4G LTE Industrial Router

    Rated 0 out of 5
    £198.00 Excl VAT
  • RUT951

    Teltonika RUT951 Industrial 4G Router

    Rated 0 out of 5
    £174.00 Excl VAT
  • RUT241

    Teltonika RUT241 Compact 4G Router

    Rated 0 out of 5
    £128.00 Excl VAT
  • RUT901

    Teltonika RUT901 Industrial 4G Router

    Rated 0 out of 5
  • Teltonika RUTX12 4G CAT6 LTE Router for M2M IOT

    Teltonika RUTX12 Dual LTE CAT6 WiFi Router

    Rated 0 out of 5
    £378.00 Excl VAT
  • Teltonika RUTX14 4G LTE CAT12 Router

    Teltonika RUTX14 4G LTE Industrial Router

    Rated 0 out of 5
    £391.00 Excl VAT
  • Teltonika RUTX50 5G Router

    Teltonika RUTX50 Industrial 5G Router

    Rated 0 out of 5
    £475.00 Excl VAT
  • RUT200

    Teltonika RUT200 Industrial Cellular Router LTE 4G

    Rated 0 out of 5
    £97.00 Excl VAT
  • MIMORAD 5G Antenna 2x MIMO

    Fullband® MIMORAD Outdoor 4G/5G MIMO Antenna 6dBi Peak Gain with 2 x 5m cables with SMA Male Connectors

    Rated 0 out of 5
    £55.00 Excl VAT
  • Fullband® FBXPMIMO 8dBi peak gain – Cross Polarised Outdoor 4G/5G MiMo Antenna for optimum 4G signal reception – supplied with 2 x 5m long antenna cables.

    Rated 0 out of 5
    £99.00 Excl VAT

Our Blog

Get in Touch