Key Features
Available on back-order
£198.00 Excl VAT
Available on back-order
The Teltonika RUT906 Industrial 4G Router is destined to replace the RUT956 and RUT955 routers. It is the lower cost option for the RUT956 and uses the Mediatek modem board. With this lower cost device being available in August 2023, many customers will opt for this due to the cost savings.
| Category | Feature | Description |
|---|---|---|
| MOBILE | Mobile module | 4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection | |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID | |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP | |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages | |
| Black/White list | Operator black/white list | |
| Band management | Band lock, Used band status display | |
| APN | Auto APN | |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN | |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN | |
| WIRELESS | Wireless mode | IEEE 802.11b/g/n, Access Point (AP), Station (STA) |
| WiFi security | WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation | |
| SSID/ESSID | ESSID stealth mode | |
| WiFi users | Up to 100 simultaneous connections | |
| Wireless Hotspot | Captive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes | |
| Wireless Connectivity Features | Fast roaming (802.11r), Relayd | |
| ETHERNET | WAN | 1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX |
| LAN | 3 x LAN ports, 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX | |
| NETWORK | Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL) | |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets | |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection | |
| Firewall | Port forward, traffic rules, custom rules | |
| DHCP | Static and dynamic IP allocation, DHCP Relay | |
| QoS / Smart Queue Management (SQM) | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e | |
| DDNS | Supported >25 service providers, others can be configured manually | |
| Network backup | WiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover | |
| Load balancing | Balance Internet traffic over multiple WAN connections | |
| SSHFS | Possibility to mount remote file system via SSH protocol | |
| SECURITY | Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T | |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) | |
| VLAN | Port and tag-based VLAN separation | |
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number | |
| WEB filter | Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only | |
| Access control | Flexible access control of TCP, UDP, ICMP packets, MAC address filter | |
| VPN | OpenVPN | Multiple clients and a server can run simultaneously, 27 encryption methods |
| OpenVPN Encryption | DES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192, BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256 | |
| IPsec | IKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16) | |
| GRE | GRE tunnel, GRE tunnel over IPsec support | |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support | |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code | |
| DMVPN | Method of building scalable IPsec VPNs | |
| SSTP | SSTP client instance support | |
| ZeroTier | RUT906 supports ZeroTier VPN client support | |
| WireGuard | WireGuard VPN client and server support | |
| Tinc | Tinc offers encryption, authentication and compression in its tunnels. Client and server support | |
| BACNET | Supported connection types | RS485, TCP |
| Supported modes | Router | |
| OPC UA | Supported modes | Client, Server (planned) |
| Supported connection types | TCP | |
| DNP3 | Supported modes | TCP Station, Outstation |
| Supported connection types | RS232, RS485, TCP, USB | |
| MODBUS | Supported modes | Server, Client |
| Supported connection types | RS232, RS485, TCP, USB | |
| Custom registers | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality | |
| Supported data formats | 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII | |
| DATA TO SERVER | Protocol | HTTP(S), MQTT, Azure MQTT, Kinesis |
| MODBUS MQTT GATEWAY | Modbus MQTT Gateway | Allows sending commands and receiving data from MODBUS Master through MQTT broker |
| MONITORING & MANAGEMENT | WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA | Firmware update from server, automatic notification | |
| SSH | SSH (v1, v2) | |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET | |
| Call | Reboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off | |
| TR-069 | OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem | |
| MQTT | MQTT Broker, MQTT publisher | |
| SNMP | SNMP (v1, v2, v3), SNMP Trap | |
| JSON-RPC | Management API over HTTP/HTTPS | |
| MODBUS | MODBUS TCP status/control | |
| RMS | Teltonika Remote Management System (RMS) | |
| IOT PLATFORMS | Cloud of Things | Allows monitoring of: Device data, Mobile data, Network info, Availability |
| ThingWorx | Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type | |
| Cumulocity | Allows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength | |
| Azure IoT Hub | Can send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type | |
| SYSTEM CHARACTERISTICS | CPU | Mediatek, 580 MHz, MIPS 24Kc |
| RAM | 128 MB, DDR2 | |
| FLASH storage | 16 MB, SPI Flash | |
| FIRMWARE / CONFIGURATION | WEB UI | Update FW from file, check FW on server, configuration profiles, configuration backup |
| FOTA | Update FW | |
| RMS | Update FW/configuration for multiple devices at once | |
| Keep settings | Update FW without losing current configuration | |
| FIRMWARE CUSTOMIZATION | Operating system | RutOS (OpenWrt based Linux OS) |
| Supported languages | Busybox shell, Lua, C, C++, and Python, Java in Package manager | |
| Development tools | SDK package with build environment provided | |
| LOCATION TRACKING | GNSS | GPS, GLONASS, BeiDou, Galileo and QZSS |
| Coordinates | GNSS coordinates via WebUI, SMS, TAVL, RMS | |
| NMEA | NMEA 0183 | |
| NTRIP | NTRIP protocol (Networked Transport of RTCM via Internet Protocol) | |
| Server software | Supported server software TAVL, RMS | |
| Geofencing | Configurable multiple geofence zones | |
| SERIAL | RS232 | DB9 connector, RS232 (with RTS, CTS flow control), 300 to 115200 baud rate |
| RS485 | RS485 Full Duplex (4 wires) and Half-Duplex (2 wires), 300-230400 baud rate | |
| Serial functions | Console, Serial over IP, Modem | |
| USB | Data rate | USB 2.0 |
| Applications | Samba share, USB-to-serial | |
| External devices | Possibility to connect external HDD, flash drive, additional modem, printer, USB-serial adapter | |
| Storage formats | FAT, FAT32, exFAT, NTFS (read-only), ext2, ext3, ext4 | |
| INPUT / OUTPUT | Input | 1 x digital dry input (0 – 3 V), 1 x digital galvanically isolated input (0 – 30 V), 1 x analog input (0 – 24 V), 1 x Digital non-isolated input (on 4-pin power connector, 0 – 5 V detected as logic low, 8 – 30 V detected as logic high) |
| Output | 1 x digital open collector output (30 V, 250 mA), 1 x SPST relay output (40 V, 4 A), 1 x Digital open collector output (30 V, 300 mA, on 4-pin power connector) | |
| Events | Email, RMS, SMS | |
| I/O juggler | Allows to set certain I/O conditions to initiate event | |
| POWER | Connector | 4-pin industrial DC power socket |
| Input voltage range | 9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max | |
| PoE (passive) | Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 30 VDC | |
| Power consumption | < 2 W idle, < 7 W Max | |
| PHYSICAL INTERFACES | Ethernet | 4 x RJ45 ports, 10/100 Mbps |
| I/O’s | 2 x Inputs and 2 x Outputs on 10-pin industrial socket, 1 x Digital input and 1 x Digital output on 4-pin power connector | |
| Status LEDs | 1 x Bi-color connection status, 5 x Mobile connection strength, 4 x ETH status, 1 x Power | |
| SIM | 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders, eSIM (Optional) | |
| Power | 1 x 4-pin power connector | |
| Input/output | 1 x 10-pin industrial socket for inputs/outputs | |
| Antennas | 2 x SMA for LTE, 2 x RP-SMA for WiFi, 1 x SMA for GNSS | |
| USB | 1 x USB A port for external devices | |
| RS232 | 1 x DB9 socket | |
| RS485 | 1 x 6-pin industrial socket | |
| Reset | Reboot/User default reset/Factory reset button | |
| PHYSICAL SPECIFICATION | Casing material | Aluminium housing, plastic panels |
| Dimensions (W x H x D) | 109.5 x 50 x 100 mm | |
| Weight | 295 g | |
| Mounting options | DIN rail (can be mounted on two sides), flat surface placement | |
| OPERATING ENVIRONMENT | Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing | |
| Ingress Protection Rating | IP30 | |
| REGULATORY & TYPE APPROVALS | Regulatory | CE, UKCA, RCM, CB |
| EMI IMMUNITY | Standards | EN 55032:2015+A11:2020, EN 55035:2017+A11:2020, EN 61000-3-3:2013+A1:2019+A2:2021, EN IEC 61000-3-2:2019+A1:2021, EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN 301 489-19 V2.2.0, EN 301 489-52 V1.2.1 |
| ESD | EN 61000-4-2:2009 | |
| EFT | EN 61000-4-4:2012 | |
| Surge Immunity (AC Mains Power Port) | EN 61000-4-5:2014+A1:2017 | |
| CS | EN 61000-4-6:2014 | |
| DIP | EN IEC 61000-4-11:2020 | |
| Radiated Immunity | EN IEC 61000-4-3:2020 | |
| CE | EN 62311 | |
| CB | IEC 62368-1:2018 | |
| RF | Standards | EN 301 908-1, EN 301 908-2, EN 301 908-13, EN 300 328 |
STANDARD ORDER CODES
AVAILABLE VERSIONS
The Teltonika RUTX50 is your future-proof, multi-network industrial router, offering 5G mobile communication for high-speed and data-heavy applications.
5G Routers
4G Routers
Teltonika 5G Routers
Teltonika 4G Routers
© 2020 – 2023 , RUTX50 | Millbeck Communications Ltd Ltd
Reviews
There are no reviews yet.